Product Name:
Gb Standard Alloy Steel Toothed Wheel
Product Attribute:
Application:
Standard
Product Description:
EN10204 3.1certification is provided,containing the following details.
A Chemical composition(C,Mn,P,S,Si,Cu,Ni,Cr,Mo,V,CE)
B Mechanical properties(yeild strength,tensile strength,elongation, reduction of area)
C Heat treatment(normalized,tempered,quenched,anneal)
D Hardness(standard: NACE MR0175)
E Impact test
Ultrasonic Test report is also provided.
UT testing standard: ASTM A388
UT acceptance standard: ASME B16.34 APPENDIX IV
UT equipment: HS610e
UT technique: Straight/Contact
FREQUENCY: 2.5MHz
Probe Used: 2.5P 20
Test Blocks: 3
SENSITIVITY: 3+13dB(6.4)
Couplant: OIL
3.2certifification&MPT report can be provided,after international Third Part Inspect(TPI) is witnessed by BVSI.
Dimension report is sent to you.
Test block from the product for mechanical testing is shipped along with your product.
Marking of Forging: Sr.No./Supplier Code/Item Code/Material Grade & Material Heat No.,Heat Treatment Lot No.
Minimum Reduction Ratio of Product is 4:1